There is a built cupboard in the living room.

He installed a set of cupboards inside the wall , which could hold a lot of things.

他在厨房里安装了一组吊柜, 可以存放很多的东西.

He emptied the closet of everything.

他取出壁柜所有的东西.

At the bottom of the wardrobe, shoes, boots, sandals, slippers are kept.

在壁柜的下部一般有鞋子 、 靴子 、 凉鞋 、 拖鞋.

The newly bought clothes were put in the built-in wardrobe.

新买来的衣服都放在壁柜里了.

After reading the letters, Michael searched the downstairs closet, then went upstairs to Francesca's bedroom.

读完信之后, 迈可搜寻了楼下的壁柜, 然后上楼到弗朗西丝卡的卧室里.

Solution: Keep all those hardworking bath essentials hidden yet handy in this cottage-style wall unit.

解决方法: 保存所有这些勤劳工作的沐浴必需品,但把这些隐藏在这方便的平房式的墙里.

This famous emperor unified the Great Wall unit of measurement, and the Chinese writing.

修建长城,统一度量衡和中国文字的著名皇帝.

We'll build in a wall-unit here.

这里我们将装个墙柜.

The inside of the wall unit has been thoroughly wiped out.

组合柜里面已彻底擦干净了.

Products shape, weight, size, thickness can be pre-designed, a multi-cavity, consistency and efficient.

制品外型, 重量, 尺寸, 壁厚可预先设计, 一模多腔, 一致性好,效率高.

The kapok fiber has thin andlumen, the hollow ratio can reach 97 %.

木棉纤维壁薄,具有高达97%的中空率,壁厚不均匀,纵向表面有微小凸痕.

If the concept of the gate-depth-wall-section relalionship is accepted then the gate depth is established first.

假如浇口深度和塑件壁厚之间的关系得到确认,则浇口深度首先得到.

The process schedule to improve non-uniform shell wall thickness on plug mill is investigated.

研究了在自动轧管机上减小荒管壁厚不均的工艺方案.

Wall thickness, length, thread of flat drill rods can be made according to your requirements.

外平钻杆的壁厚, 长度, 螺纹可按客户要求配置.

The said calculation formula is useful for accurate control of the final tube wall thickness tolerance.

该计算式对精确控制成品管壁厚精度具有实际意义.

The fiber length, diameter cell wall thickness and ratio of length to width are 891.

木纤维长度 、 直径、双壁厚、长径比均随着树龄的增加而增加,其平均值分别为891.

Aluminum motorcycle left-cover has the features of uniform wall-thickness and large profile dimension.

摩托车铝合金左盖压铸件,壁厚比较均匀,外形尺寸较大.

You can a Section a new Sections tab added in the Wall Thickness Analysis dialog box.

动态切片这一新功能,您可以直观条飞机在指定的位置三维剖面的一部分.

The regional movement and the wall thickness of the infarcted segments were abnormal.

梗死节段室壁运动及室壁厚度异常.

So wall thickness of metal mould is neither thin nor thick.

因此,模壁既不能过薄也不宜过厚.